View Full Version : Wind Power
- Wind Links
- Recording Anemometer
- anemometer tower
- Found at the port of Beaumont Texas
- Wind and hydrogen combined - new study
- New Member
- Small Wind Manufacturers 0W-10kW
- Line Loss Calculator
- Here's a novel wind tower, Savonius type.
- DIY - New Paradigm
- Looking for ideas for wind charge controllers
- Large scale wind projects
- small wind recs/Bergey questions
- Turbine output voltage
- Skystream findings?
- Grid Tie Question
- Anybody want to challenge a claim on VAWT that can outperform any HAWT?
- Scottish waterwheel
- Solar and Wind
- This about that
- Asynchronous generation
- Tower design
- Quiz: Reasons for dump load and furling?
- fiberglass blade availability
- Wind power evaluation
- 3 kw wind turbine
- Wind Powered Water Condenser
- European H Axis Photos
- Self excited induction motor/generator
- Building wood blades tutorial (page1)
- blade carving tutorial (page 2)
- Hummer Wind Turbines.
- Band posting
- Wild Goose Flies
- More vertical axis
- PM motors for possible whatever ???
- wind at ground level
- Need help with blade sizing
- convert ac motor to dc
- Airfoil profile choice
- Watt vs. kilo-Watt-hours, and instantaneous vs. average wind speed
- It's a bird, it's a plane ...It's a bird !
- 24v wiper moter
- Skystream in the Marsh...
- Anti wind power bill in US - can't do true!
- Hi Guys
- 1st Annual International Member RE Tour
- High-tech sail boats
- Interesting video
- How to protect against lightning damage?
- Need some help,
- ARE wind turbines
- Bigger wind
- Using an EV Regenerative controller to charge batteries
- V-Axis testing
- 28vdc motor
- Are you curious?
- 75% noise reduction for wind turbines
- Lessons from Installing an Eoltec Scirrocco
- Dual rotor / tiltup furl
- Introduction from a new member
- UK planning 33GW !
- torque/stress calcs
- Control system design.....
- New member from down under, TheBackShed.com
- Performance charts -solidity/torque/yaw
- Dual rotor /tiltup furl (revised)
- hybrid back-up
- Benesh VAWT taking shape
- Introduction of new member
- Windy in Endicott;
- Aurora inverters with a 17.5 Jake?
- Tilt Up Tower Pix
- 3ph Motor-Alternator Conversion
- Beginner looking for advice
- Wild Goose Flys Again - II
- VAWT HOT WATER - Greater Efficiency?
- Blade Spec Calculator (enhanced!)
- reality check
- free software
- Hingeing a Tower
- Bumpy Fins Increase Efficiency?
- Prairie Turbines "Breezy 5.5"
- Net-Zero Energy House
- Data logging
- here's one we don't want to see.
- Lakota no more!
- Good Three Phase Wind Turbine Grid-Tie inverter
- Introduction and the days ive been experimenting
- Ultra low rpm HAWT Wind Turbine~5 KW @ 115rpm!
- Inverters
- SWEET: A Wind Energy Prediction Model
- check your FAN !
- Windbelts
- Another VAWT Design
- "Scrap" Wind Turbine
- Low starting torque, low cogging and resistive torque Alternator!
- brake system
- New Design Turbine?
- Remote Reset Project
- Air Rotor
- HAWT on crankup/tiltover tower
- Grid connection
- Aurora Inverters - An Announcement!
- Fin Angle to have a better performance?
- Another wind 'event' with my 17' turbine, 50+mph unexpected burst of wind encountered
- Furling issues - others here having similar?
- Report on Energy Loss In Bergey 10 kW turbines (Interim)
- Hello guy's
- turning out of the wind
- SWIEP postings and corrections
- Turbine With Shroud
- test turbine install
- Calculating power output for a VAWT
- Wondering about turbine makes made in China
- Life expectancy of a Eoltec Scirocco
- Free standing tip up tower?
- Building mounted wind turbines - The Warwick Wind Trials
- Follow up on free standing tower
- Upgrade Lakota w/ginlong 1800
- Heavy duty self standing tower
- Climbing Robot Turnbine Inspector
- A mighty wind: U.S. becomes top wind power producer - USA Today article
- Science Fair Help
- Dangerous Turbine Failure
- Aurora windinterface
- 2kw mobile show truck
- Automatic Wind Turbine Shutdown
- Webcam on our small 500 watt turbine
- Cluster of five small windgenerator
- Green Ideas turbines
- 17' turbine - needing maintenance
- Wind Generators - just a science experiment?
- site assessment
- skystream
- New Member
- Starting my Second One
- Wind Arrow
- Breezy 5.5
- Furling 500 watt Hummer Generator
- --Parrallel the field windings -----
- Real World Conditions - Weather Proofing
- Who Builds The Best Turbine?
- 11'6" wind turbine
- Operating temperature of wind generators
- Huricane conditions
- Lightweight Turbine
- Building a 2Kw Hummer windgenerator
- Generator solution for low RPM VAWT
- For anyone that is considering a SkyStream...
- UK Wind trial report of 154 turbines
- Ginlong wind inverters
- Small wind future?
- Vdc from Vac 3 phase
- Progress refresh
- Hi Joseph OLall and Others! My Project Introduction
- Ceining Fan Generator
- Would nationwide setback standards silence NIMBYs?
- wind and clean air
- New build projects
- 5Kw Windgenerator on 12 meter hydraulic tower
- Business Renewable Energy Conversion
- We did it again 5kw on 15 meters
- Moist in older generator
- Is It Possible To Use The "Dyson" Principles In A Wind Turbine?
- Yes, but it won't fly ... will it?
- Where to buy towers
- Hello, and where to get an electric winch
- Carving Wind Turbine Blades
- I do not want to charge batteries
- Wind Turbine prices have to come down
- lesson building a 12 meter hydraulic tower
- Vintage Jacobs Wind turbine
- Fiberglass blades
- New Representation Of Lakota And Longbow-Zytech Aerodyne
- Wind Data for 2009 location: WV, USA
- The Ultimate VAWT Project
- Rectified 3 phase wild AC
- Anyone use Alxion PMGs?
- Small Wind and siteing Again
- warranty on installs
- Very basic questions...
- Purchase Price Survey-Zytech Aerodyne
- 2kw on grid
- Tower on the ground and not in the ground
- Some good wind
- Getting the most out of an 'old' 10 kW Bergey
- 17' Grid Tied w/Power-one 6000
- 10 kw new type
- Aurora 3.6 Inverter
- Wind-Box vs Homemade Rectifier
- rectifier help
- DIY windmill, need help with generator/motor among other things
- H80 repairs
- Where to buy Ginlong Generators?
- Frequency Signal Generator
- Could this "Solar Breakthrough" also benefit Wind Power?
- Motors for DIY generator
- Wind Turbine. ?
- 3 phase AC dump load
- 5kw on 15 meters hydraulic tower
- New Member says HELLO!
- Status Dutch Scirocco
- New member with aurora questions
- Scirocco and arctic weather
- Question.. Battery Bank to Home Usage?
- Permitted Whisper 200 Install in PA
- Exmork Grid Tie Controller
- Comparing turbine inverters.
- Vertical Wind Turbines For Residential Use
- My 17 foot axial flux
- Warning wrong software for the 10KW SWG
- China Wind Turbine Experience
- Referentialexperience with China Wind Turbine?
- FYI--Southwest Wind Units
- My experiences with a 2kw turbine generator
- Grid tied axial flux 18 footer
- Password for Aurora Inverter PVI-6000-out-de-w
- Arora question
- Help with a few Questions
- commercial shrouded design
- Dump Load using 14V Grid Tie
- Chinese towers
- regulator for single phase turbine?
- Hi, and these are my thoughts on a turbine
- Parafold Tower
- breaking pma in storms
- So, how much power will my wind turbine make? An informational thread.
- question on hydraulic rams
- What VAWT has the best output for low wind conditions
- any engineers out there willing to give input
- Most Important Questions to Ask About Wind Turbines
- wind generator resourses
- PVI 7200 Dump Load Question
- SWG turbines support
- aurora & windy boy
- I need a 2KW turbine, HELP
- Utilizing the Air Around Us
- question about batteries
- Using the electric efficiently
- Rooftop turbines DON'T WORK!
- New Member
- Wind Turbine Ratings
- Chinese Hummer Wind Turbine Problem
- Most efficient Wind Turbine for low wind speed areas
- overvoltage on a aurora 6000
- The Truth About Small Wind Turbines
- Can we be pragmatic about renewable energy?
- Ground Rod in Water
- new film
vBulletin® v3.8.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.